Edit
gai.conf:sudo gedit /etc/gai.conf
precedence ::ffff:0:0/96 100
Archive for 2015
Install Android without touching Data (User configurations and applications) or a partition that contains Windows 8.1
The course deals only flashes of flash this: boot erase: cache erase: erase system: flash logs: system
1- Download the zip here: Archives pour installer Android.rar Size: 738.5 MB
2- . Install the necessary drivers
To install the drivers, extract the zip file and then install the two drivers that are in the Android Driver folder (Intel) 'and' Android Driver (USB) ".
The installation pose no complications,
3- Install the flash program (Flash Tool)
In the extracted folder 'Archives for installing Android' Android Flash 'we execute with administrator rights ManufacturingFlashTool_Setup_6.0.43'.
CUSTOM_CONFIG Copy the file in the folder 'Android Flash' 'and stick it in the folder programme'Flash Tool'. (The path is usually C: // Programs (x86) / Intel / Flash Tool Manufacturing).
Help> Flash Tool Manufacturing on the shortcut on the desktop, right-click then click Open file location.
After that we will open the program with administrator rights (right click, run as administrator).
4- Setting ManufacturingFlashTool
When the program starts, we'll Set as the picture below.
VID: PID 8087: 0A65
VID: PID 8087: 09EF
5-Select the flash file
The next step will be to choose the file that contains the data to flash the tablet.
To do this, we go to "File"> "Open", select from the extracted
folder 'Archives for installing Android' Android system files 'file'
flash_userdebug *.
NOTE: Press Power + Volume up and check that the OS by default is ANDROID
With your tablet off, holding the volume + and - buttons and the on / off button. When the tablet is on, hold only the volume buttons until you see this screen:
At this point, we will now be able to connect the tablet to the computer. If everything is successful, the program will start to install the system in your Android tablet.
Step 8. Start the tablet android
When installation is complete, we can now disconnect our tablet PC and press the power button.
1. shut down tablet and connect it to pc through USB
2. tablet has to be recognized by adb-tools ; Open CMD with administrative permissions (run as Administrator) then write : "adb devices". this will list your tablet name , ex : BayTrailXXXXX (if tablet is not shown then you need to look for drivers)
3. if tablet is recognized then type : "adb root " (without parentheses^^) then hit enter .
4. then type : "adb shell" hit enter
5. we are now inside tab shell, ; type these 5 commands 1 after 1 and hit enter after each one
mount -o rw,remount /system
cp -a /system/bin/app_process.orig /system/bin/app_process
chown 0:2000 /system/bin/app_process
chmod 0755 /system/bin/app_process
/system/bin/restorecon /system/bin/app_process 2>/dev/null
6. type "exit" to quit shell
7. now reboot your tab and it will boot just fine
8. If I helped you <follow me on google+>
9.elif post a comment of what u didn't understand.
Actually these methods will work on most AndroidX86 devices not only this tablet
First Method:
1. Download/Install Terminal Emulator from play store
2. Download/Install Root Exploreror es file explorer
3. Download/install Xposed Framework
4. With root explorer /es go to /system/bin/ rename app_process to app_process.xposed-bak, then rename rename app_process.orig to app_process
5. Open Terminal Emulator
type "su" without quote then execute
type "echo 0x98 > /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset" without quote then execute
type "chmod 664 /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset" without quote then execute
Second Method :
enter these commends either from your computer using adb tools or from within your tablet using terminal emulator
echo 0x98 > /data/data/de.robv.android.
chmod 664 /data/data/de.robv.android.
loading...
Freshplayer Flash Plugin
You might or might not be aware that Adobe is no longer developing Flash for Linux. Google Chrome comes with its own version of flash player, so that is not a concern. However, for Firefox users, the only way to get the most current version of flash player is by using Chrome’s Pepper Flash plugin. For the longest time, this has been a source of frustration. A lot of people have been worried about being left behind on an old version of flash. No longer is this a problem. A developer has created a plugin wrapper for Firefox (it will not work with other browsers).Before Freshplayer can be installed, Pepper Flash needs to be. Open a terminal window and enter the following commands.
sudo apt-get install pepperflashplugin-nonfree
Once installed, configure it.
sudo update-pepperflashplugin-nonfree --install
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update
sudo apt-get install freshplayerplugin
After installing, navigate to the plugins section of Firefox. You should see something similar to the image below. Note that the file says “libfreshwraper-pepperflash.so”.
 |
how to get apt-get to work again.
Edit |
How to Fix configure error: You must have GTK+ 2.10.0 or newer development headers installed
Tag :
Linux-Tutorials
So your problem is :
checking for GTK... no
no
configure: error:
You must have GTK+ 2.10.0 or newer development headers installed to compile
Pidgin. If you want to build only Finch then specify --disable-gtkui when
running configure.
To fix it, type the following in your Terminal:
sudo apt-get install libgtk2.0-dev
$ df
The command above will display the directory path of your various drives. Take note of the drive you want
You need two USB burning tools for that
. V1.6... Usb-Burning-Tool v1.6
and V2....Usb-Burning-Toll v2.04
First extract the three scripts
Start USB burning tool V1.6...
- File --> Import Config File --> load first XML file --> click to "Start"
USB connect the tab. Insert SDCard with ONLY u-boot.bin on it. Power/Vol+
USB Tool runs first script. Watch the log section in USB tool.
Click to stop
Power tab off - long press until tab disappears in device manager.
- File --> Import Config File --> load second XML file --> click to "Start"
Power/Vol+
USB Tool runs second script. Watch the log section in USB tool.
Click to stop
Power tab off - long press until tab disappears in device manager.
- File --> Import Config File --> load third XML file --> click to "Start"
Power/Vol+
USB Tool runs third script. Watch the log section in USB tool.
Click to stop
Power tab off - long press until tab disappears in device manager.
- Close USB burning tool V1.6...
- Remove SDCard
- Start USB burning tool V2...(setup_v2.0.4_x86_by-mostafataliza.exe)
- Click to second menu in the tool and switch to english.
- File --> Import Image --> Select stane1983's V0.9.2 USB ROM image file
- click to "Start"
- Power/Vol+
- Cross fingers and hope the tool does it's job.
for those who are getting erors when flashing rom using USB-BURNING-TOOL just check the first option in configuration ( erase flash) and the second (erase bootloader) and the fourth (overwrite key)
Penetration testing is one of the most in-demand skill sets right now. There are more jobs that require advanced level hacking then there are people who have the ability to fill them. Training for advanced penetration testing has traditionally been VERY expensive. Not any more, now, its FREE. No one should be restricted from learning, and this class is a really great one.
Let Penetration Testing and Hacking Subject Matter Expert, published Author, and industry event speaker, Georgia Weidman teach you advanced penetration testing, for free!
About the Online Advanced Penetration Testing Training
Aggressive systems require aggressive hackers. Advanced Penetration Testing training embodies that notion. It’s an intense approach to the world of exploitation and pentesting set in the highest security environments around. In our free online Advanced Penetration Testing training class, you’ll learn how to challenge traditional practices and use alternate methods and software in penetration testing. Cover how to attack from the web using cross-site scripting, SQL injection attacks, remote and local file inclusion and how to understand the defender of the network you’re breaking into to. You’ll also learn new tricks for exploiting a network and the post-exploitation process—how to backdoor SSH logins, enable RDP/VNC and additional data exfiltration techniques. It’s a headfirst dive into the world of advanced pentesting, and there are no life jackets—only binaries.
CEU / CPE: 20
Total Clock Hours: 14 hrs, 36 mins
Total Clock Hours: 14 hrs, 36 mins
This course is divided into Modules
Each course have it's download link
Module 1 - Linux
Module 2 - Programming
Module 3 - Metasploit
Module 4 - Information Gathering
Module 5 - Vulnerability Discovery/Scanning
Module 6 - Traffic Capture
Module 7 - Exploitation
Module 8 - Passwords
Module 9 - Advanced Exploitation
Module 10 - Post Exploitation
Module 11 - WebApps
Module 12 - Exploit Development
Module 13 - Smartphone Pentest Framework
here I present to you WINDOWS LOADER
This activator works for all versions (Retail and OEM Edition)
and all Editions.
Tested and working on both x86 and x64.
Works in Virtual Environment.
Works with dual-boot
No key is needed for install or activation.
The activation adds the OEM master key for you.
Select your OEM Information
No BIOS modification needed.
It has no boot text.
Uses OEM SLP method.
Supports SLIC and non-SLIC enabled BIOS:
Emulate a SLIC 2.1 enabled BIOS on a PC without SLIC 2.1 present...
Use 'Install 7Loader' to install the certificate & key to activate offline...
To create a USB stick follow these instructions:
- 1Insert a USB stick .
- 2Open the dash and search for Startup Disk Creator.
- 3Select the Startup Disk Creator to launch the app.
- 4Click 'Other' to choose the downloaded ISO file.
- 5Select the file and click 'Open'.
- 6Select the USB stick in the bottom box and click 'Make Startup Disk'.
- 7That’s it! When the process completes, you’ll be ready to restart your computer and boot from your usb.
Variety
Variety is an applet indicator that lets you create wallpaper slideshow from pictures stored at various location as well as from several different online sources such as Picasa and Flickr. Apart from setting the time interval for the slideshow, you can also apply various filters for blur or oil paint effect on the wallpapers. Since Variety sits in the top panel, you can use it for a quick change in the background image or deleting a wallpaper. To change the settings or configuration select Preference from the drop down:
You can see the different configuration options here. As advised before, select the option to start Variety at start up to enjoy the wallpaper slideshow painlessly.
Use the following commands to install Variety in Ubuntu:
sudo add-apt-repository ppa:peterlevi/ppa
sudo apt-get update
sudo apt-get install variety
Use the following command to remove Variety:
sudo apt-get remove variety
You'll have to update drivers in Windows when a hardware device doesn't install automatically, like after a Windows clean install.
Updating drivers is also a great troubleshooting step when the device is having some kind of problem or is generating an error like a Device Manager error code.
Updating Windows 8 drivers also isn't always a fix-it task. An updated driver may sometimes enable new features for the hardware, something I see on a regular basis with popular video cards and sound cards.
Regardless of why you're updating them, here's an easy-to-follow tutorial on how to update drivers in Windows 8. If even this isn't simple enough.
Difficulty: Easy
Time Required: It usually takes around 15 minutes to update a driver
Applies To: The driver update process is identical in all editions of Windows
This is your Solution
Review summary
Good points 
• Features a safe, extremely comprehensive driver database
• Makes it easy to download and install up-to-date drivers
• Can be scheduled to update drivers automatically
• Offers excellent backup-and-restore functionality
Bad points 
• Lacks customization options
verdict
Advanced Driver Updater is a highly effective system utility designed for users of all experience levels. Those looking for an easy way to keep system drivers up to date will appreciate the convenience that Advanced Driver Updater provides.
Images:
DESCRIPTION
INSTALLATION
1. Download the. Zip file and dump the firmware to the memory card.
2. Loaded in Recovery
3. Making wipes:
1) Wipe Data Factory Reset
2) Wipe cache partition
3) Mounts and storage -> format system
4) Advanced -> Wipe Dalvik Cache
5) Select Install / Install zip from SD
6) Choose. Zip firmware file and wait for the end of the process.
7) Boot the system.
gapps included – rooted – theme supported
Multilingual…
Notes: First boot takes long time please wait…
INSTALLATION
1. Download the. Zip file and dump the firmware to the memory card.
2. Loaded in Recovery
3. Making wipes:
1) Wipe Data Factory Reset
2) Wipe cache partition
3) Mounts and storage -> format system
4) Advanced -> Wipe Dalvik Cache
5) Select Install / Install zip from SD
6) Choose. Zip firmware file and wait for the end of the process.
7) Boot the system.
gapps included – rooted – theme supported
Multilingual…
Notes: First boot takes long time please wait…
