04 April 2015
You need two USB burning tools for that
. V1.6... Usb-Burning-Tool v1.6
and V2....Usb-Burning-Toll v2.04
First extract the three scripts
Start USB burning tool V1.6...
- File --> Import Config File --> load first XML file --> click to "Start"
USB connect the tab. Insert SDCard with ONLY u-boot.bin on it. Power/Vol+
USB Tool runs first script. Watch the log section in USB tool.
Click to stop
Power tab off - long press until tab disappears in device manager.
- File --> Import Config File --> load second XML file --> click to "Start"
Power/Vol+
USB Tool runs second script. Watch the log section in USB tool.
Click to stop
Power tab off - long press until tab disappears in device manager.
- File --> Import Config File --> load third XML file --> click to "Start"
Power/Vol+
USB Tool runs third script. Watch the log section in USB tool.
Click to stop
Power tab off - long press until tab disappears in device manager.
- Close USB burning tool V1.6...
- Remove SDCard
- Start USB burning tool V2...(setup_v2.0.4_x86_by-mostafataliza.exe)
- Click to second menu in the tool and switch to english.
- File --> Import Image --> Select stane1983's V0.9.2 USB ROM image file
- click to "Start"
- Power/Vol+
- Cross fingers and hope the tool does it's job.
for those who are getting erors when flashing rom using USB-BURNING-TOOL just check the first option in configuration ( erase flash) and the second (erase bootloader) and the fourth (overwrite key)
